Here you will find the right solution for upstream and downstream processes around your thermoforming machine. At the beginning of the thermoforming process, an unreeling unit is required for the film rolls, after which the film is heated by a preheater.
Downstream, film residues can be grinded by a skeleton grinder and thus prepared for the new feed into the thermoforming process.
Learn more about our upstream/downstream solutions below.
The KA unwinding unit enables sophisticated control of film rolls --> no stop & go.
It indicates the end of the film and can be modularly extended by a lifting device and ultrasonic joining unit.
The preheater KVH has a sophisticated control of the film loops -> no stop & go.
Due to the efficient film heating, the power consumption can be kept low. The KVH can also score as an independent unit with non-Kiefel machines.
KA 83 / KVH 83 |
KVH 90 | KA110 / KVH 90 |
|
KMD 64 | x | ||
KMD 78 | x | x | x |
KMD 85 / 90 | x | x | |
KTR 5 | x | x | x |
KTR 6 | x | x |
The SPEEDGRINDER is a so-called "skeleton grinder" which grinds the residual skeleton which is produced in the thermoforming process after the packaging has been cut out. The crushed smallest parts can then be fed back into the extrusion process and thus be processed into plastic film again.
The KSG - available in two versions - is characterized by high operational reliability and maximum machine utilization. The generously sized access doors offer a significant advantage during maintenance. Designed to meet the highest requirements of food and safety regulations, the KSG stands for grinding solutions with the lowest noise and dust levels in the industry.
KSG 90-400 - |
|
KSG 90-600 - |
|
Motor power | 22 kW (Max.) |
Infeed opening | 920 mm |
Max. noise level | 80 dB (real production) |
Rotor speed | 420 rpm |